This stillage holds 60 diagonally stacked barriers allowing safe transportation with the added benefit of space saving. Two stillages can be stacked on top of one another.
• Weight empty 83 kg
• Dimensions 1200 x 1200 x 1336 mm
Art. No. 2010007
Product sheet
The Euro storage box is a standardised means of transportation for safe transport of temporary edge protection components.
• Weight 70 kg
• Dimensions 1240 x 835 x 970 mm
Art. No. 6010003
Product sheet
Storage container with lifting points. Designed for easy transportation and storage of temporary edge protection components.
• Weight 68 kg
• Dimensions 1300 x 820 x 970 mm
Art. No. 6010006
Product sheet
The VT post stillage is used to safely transport and store edge protection posts. Three stillages can be stacked on top of each other.
• Dimensions 970 x 970 x 950 mm
Art. No. 9310014
Product sheet
The VT barrier retaining clip has a dual action fitting that slides over the temporary edge protection post to retain the mesh barrier onto the post. It is also used to support mesh barriers in raised position for screeding or stop-end installation on steel structures.
Art. No. xxxxxxx
Product sheet
VT alu beam clamp is an adjustable clamp designed to connect temporary edge protection system to aluminium primary and secondary beams. Fits most proprietary beams from Ishebeck, Hunnebeck and RMD Kwikform.
Art. No. 9110057
Product sheet
Storage and transportation stillage frame that stores 25 barriers. Two VT barrier frames 25 can be stacked on top of each other.
• Weight empty 60 kg
• Dimensions 1160 x 790 x 1300 mm
Art. No. 2010001
Product sheet
The VT Steelweb is connected to steel sections using a set-screw through a pre-drilled hole. When Posts and Barriers have been inserted into it, the completed temporary edge protection system will sit off the sections from 20 to 300 mm. This makes it possible to install systemised façade system without removing the edge protection, and protecting the installers until the structure is permanently secured.
VT Steelweb brackets can be delivered pre-set to the distance determined by the steel section flanges or unset for site adjustment. An orange marked anchor point indicates where the VT steelweb bracket can be tethered when being removed to prevent it from falling.
• Compliancy BS EN 13374, class A
• Weight 4.2 kg
• Dimensions 320 x 422 x 161 mm
Art. No. 5040010
Product sheet
The VT edge bracket connects the temporary edge protection system to vertical surfaces. By using this bracket the edge protection will sit off the slab by 80 mm, eliminating the need to remove it during various work. It is commonly used on slab edges when systemised façade systems have to be installed from the inside of the structure.
An orange marked anchor point indicates where the VT edge bracket can be tethered when being installed or removed to prevent it from falling.
• Compliancy BS EN 13374, class A
• Weight 2.1 kg
• Dimensions 355 x 140 x 57 mm
Art. No. 5040006_8
Product sheet
The VT foot connects the temporary edge protection to the top of a concrete floor slab. It is anchored using a 12 mm reusable screwbolt. Posts are inserted into the VT foot to support VT barriers to single or extended heights.
An orange marked anchor point indicates where the VT foot can be tethered when being installed or removed to prevent it from falling.
• Compliancy BS EN 13374, class A
• Weight 2.0 kg
• Dimensions 200 x 195 x 125 mm
• Hot-dip galvanised (HDG)
Art. No. 5040002
Product sheet
