Category: VT attachments

VT alu beam clamp, round

VT alu beam clamp is an adjustable clamp designed to connect temporary edge protection system to aluminium primary and secondary beams. Fits most proprietary beams from Ishebeck, Hunnebeck and RMD Kwikform.

Art. No. 9110057

Product sheet

 

VT Steelweb round

VT steelweb, round

VT Steelweb round

The VT Steelweb is connected to steel sections using a set-screw through a pre-drilled hole. When Posts and Barriers have been inserted into it, the completed temporary edge protection system will sit off the sections from 20 to 300 mm. This makes it possible to install systemised façade system without removing the edge protection, and protecting the installers until the structure is permanently secured.

VT Steelweb brackets can be delivered pre-set to the distance determined by the steel section flanges or unset for site adjustment. An orange marked anchor point indicates where the VT steelweb bracket can be tethered when being removed to prevent it from falling.

• Compliancy BS EN 13374, class A
• Weight 4.2 kg
• Dimensions 320 x 422 x 161 mm

Art. No. 5040010

Product sheet

 

VT Edge 95 round

VT edge 95, round

VT foot round

The VT edge bracket connects the temporary edge protection system to vertical surfaces. By using this bracket the edge protection will sit off the slab by 80 mm, eliminating the need to remove it during various work. It is commonly used on slab edges when systemised façade systems have to be installed from the inside of the structure.

An orange marked anchor point indicates where the VT edge bracket can be tethered when being installed or removed to prevent it from falling.

• Compliancy BS EN 13374, class A
• Weight 2.1 kg
• Dimensions 355 x 140 x 57 mm

Art. No. 5040006_8

Product sheet

VT Edge 95 round with alu post

VT foot round

VT foot, round

VT foot round

The VT foot connects the temporary edge protection to the top of a concrete floor slab. It is anchored using a 12 mm reusable screwbolt. Posts are inserted into the VT foot to support VT barriers to single or extended heights.

An orange marked anchor point indicates where the VT foot can be tethered when being installed or removed to prevent it from falling.

• Compliancy BS EN 13374, class A
• Weight 2.0 kg
• Dimensions 200 x 195 x 125 mm
• Hot-dip galvanised (HDG)

Art. No. 5040002

Product sheet

VT foot round