Stainless steel dee-ring for making connection points on hand-tools using self-amalgamating tape. Robustly manufactured from 3 mm stainless steel for durability in harsh conditions. This pack contains of 5 Dee-rings.
Dimensions: 25 mm wide, 22 mm high, 3 mm thick (diameter).
Tool tethering tape consists of a roll of non-adhesive, polyisobutylene based self-amalgamating tape with strong elastic qualities. Backed by a thin film that can be stripped off cleanly. The tape is suitable for creating connection points to tools up to 10 kg in weight. Tool lanyard tape is easy to unwind, flexible, has excellent conformability to awkward shapes and is water, ozone and UV resistant with good high and low temperature performance.
Application
Cut a 500 mm length of the tape and wrap through a dee-ring placed on a suitable part of the tools handle that won’t affect the way that the tool is used. Remove the backing paper in short lengths applying the tape in layers, stretching the tape as its applied to the tool handle. Overlapping the tape causes it to contact between layers and merge to achieve a strong bond.
Certification
B.T. Spec.M128 Part No: 071309.
Storage
+12°C to +25°C. Tapes stored below the minimum recommended temperature will require warming up to that level before use. Up to 24 hours may be required for this to take place.
Technical specifications
Measurements: Length 10 m x 25 mm wide.
Typical values thickness: 0,50 mm 20,0 N/cm 600%.
Breaking load elongation: 17 kV/mm 0,5% max. Yes.
Dielectric strength, water absorption: -30°C to +100°C, 0°C to +40°C.
RoHS compliant temperature for application, storage temperature: +12°C to +25°C.
Pack contents: 1 roll.
Elasticated tool lanyard with with rotating connector and the capacity to stop tools or objects with a combined maximum weight of 10 kg if dropped. Made from strong, high quality elasticated bungee with a rotating alloy karabiner that rotates 360 degrees ensuring that the lanyard does not twist and tangle when tethering a rotating tool. At one end is a rotating karabiner, useful when working with tools or objects in a small space. A cord allows loop connection to wrist or guardrail anchor points.
When connected to a dropped tool this lanyard will stretch to 1100 mm reducing the falling force of the dropped object on the user by deceleration. When unstressed the working length is 800 mm. This elasticated lanyard has been independently tested.
Specifications
Load capacity: 10 kg
Unstressed length: 80 cm
Stressed length: 110 cm
Connector: Aluminium with locking gate
Elasticated tool lanyard with fixed connector for any hand or power tool with a weight (including battery) of 10 kg. Manufactured from heavy duty elasticated webbing with a steel karabiner for tool, wrist-strap or harness connection.
A cord tightener wraps around the wearer’s wrist or around the tool. Please refer to the sser guide. When connected to a dropped tool this lanyard will stretch to 950 mm, reducing the falling force of the dropped object on the user by deceleration. When unstressed the working length is 650 mm.
Specifications
Load capacity: 10 kg
Unstressed length: 90 cm
Stressed length: 118 cm
Connector: Steel self-closing
