Tag: beam

Clamp for edge protection on steel structure

Adjustable clamps to underside of steel sections

Clamp for edge protection on steel structure

Adjustable steel clamps are bolted to the bottom flange of steel sections holding posts and barriers outboard of the structure. This attachment method is useful when the top surface of the steel needs to be left clear for decking sheets or precast floor slabs. They are also useful for temporary phase breaks on larger structures. Adjustable steel clamps can be pre-installed onto sections pre-lifting into the structure. The steel beam clamp has an integrated attachment for the post. Barrier 2,6 is installed directly onto the post lock and its height can easily be adjusted in order to facilitate different work tasks.

PRODUCTS
• Steel beam clamp

• Post 1,5 m alu
• Barrier bracket wedge coupler
• Barrier 1,3, 1,95, 2,6

steel_beam_clamp_safetyrespect_5399

steel_beam_clamp_safetyrespect_5412

Coupler 48-50

Coupler 48-50 is used as a bracket for installing edge protection on construction sites. One end on the bracket fits SafetyRespect’s different posts and aluminium pipes and most of the common scaffold brands. The other end fits Flex Beam 50 mm and Alu Beam 50 mm.

Art. No. 915104

Flex working platform

When working on facades and roofs Flex working platform can be installed to create a safe working area. The system is both faster to install and more flexible than traditional scaffolds. The system can be adapted to most situations. Installation is mainly done by SafetyRespect in consultation with the customer.

The working platform has a type approval certificate as a scaffold issued by SP (Technical Research Institute of Sweden) in load class 2 and 3 according to AFS 1990:12.

• Flexible installation on wall, floor structure or truss.
• Used with boardwalk steel sheet.
• Configured according to requirement.
• Hot galvanized components.
• Load classification 2 and 3.
• Console weight from 12 kg.

Art. No. 981122

Product sheet

SafetyRespect Flex working platform

Working platform with fall protection

SafetyRespect Flex working platform

SafetyRespect Flex working platform

Working platform with fall protection

flex_working_platform_safetyrespect_0647

flex_working_platform_safetyrespect_0673x

 

Flex facade bracket

Flex facade bracket

Flex facade bracket

In order to create a free working space on facades Flex facade brackets can be used as attachments for temporary edge protection. The attachment itself is designed in order to facilitate installation of edge protections. The distance between the facade and edge protection can easily be adjusted during ongoing work. Flex Facade bracket is available in three different lengths to suit most situations and if the attachments are projected early in the process, the assembly goes quickly and smoothly with high safety. For more specific needs, special configurations of Flex working platform can be the solution that provides good protection without being in the way of work near the edge of the work surface.

• Adjustable 50 – 550 mm from the facade.
• Keyhole bracket.
• Installed with c/c up to 2,4 m.
• Hot dip galvanized.
• Weight 6,8 kg.

FLEX FACADE BRACKET 280
Art. no. 914043

FLEX FACADE BRACKET 400
Art. no. 914118

FLEX FACADE BRACKET 600
Art. no. 914119

Product sheet

 

Flex facade bracket - Edge protection on house roofs

Fall protection on house facade

Temporary edge protection on facade

flex_facade_bracket_safetyrespect_9736

Timber beam bracket (primary and secondary)

The Timber beam bracket is used to connect the SR temporary edge protection system to timber beams (GT24, H20 type), for example on primary and secondary beams in horizontal formwork / falsework systems.

They straddle the beams with a bolt lock underneath to clamp onto its top section. The Post 1,3 m is inserted into the Timber beam bracket. Built with a post lock inside the post holder to prevent uplift or accidental uplift which makes it suitable for using on table formwork.

Available in two lengths (primary and secondary) to ensure that the edge protection barriers are set at the correct height. Compatible with most systems including Doka and Peri.

• Integrated post lock.
• Hot dip galvanized.
• Quick screw lock.
• Weight 4,0 kg, 2,3 kg.

Timber beam bracket (primary) – Art. No. 912168
Timber beam bracket (secondary) – Art. No. 912169

Product sheet

Footway sheet end protection

Footway sheet end protection is used when installing Flex working platform on building constructions.

Art. No. 981126.

Product sheet

Flex walk way

Flex walk way is used when installing Flex working platform as edge protection on facades, roof eaves and gables.

FLEX WALK WAY
Art. No. 981123

FLEX WALK WAY RIGHT
(green) Art. No. 981124

FLEX WALK WAY LEFT
(red) Art. No. 981125

Product sheet

Flex eave bracket

Flex eave bracket

Flex eave bracket

At roof eaves, Flex eave bracket can be installed as an attachment for edge protection. This solution enables a free working space and the distance between the facade and edge protection can be adjusted during ongoing work. The bracket is installed with a through bolt in the roof frame and supports even against the facade or the roof frame.

• Adjustable bracket.
• Configured according to requirement.
• Robust and durable.
• Galvanised components.
• Weight from 5,1 kg.

Art. No. 914123

Product sheet

flex_eave_bracket_safetyrespect_2

flex_eave_bracket_safetyrespect_9820

Flex roof gable bracket

Flex roof gable bracket

Flex roof gable bracket

At roof gables the Flex gable bracket can be installed as an attachment for temporary safety barriers, which creates a free working area. The distance between the facade and the edge protection can be adjusted during ongoing work. The attachment can be done in the roof base.

• Adjustable bracket.
• Configured according to requirement.
• Robust and durable.
• Galvanised components.
• Weight from 5,1 kg.

Art. No. 914124

Product sheet

flex_roof_gable_bracket_safetyrespect_9822

flex_eave_bracket_safetyrespect_9820

Flex eave bracket with counterhold_safetyrespect_new

Flex eave bracket with counterhold

Flex eave bracket with counterhold_safetyrespect_new

At roof eaves Flex eave brackets with counterhold can be installed as an attachment for temporary edge protection. The attachment makes possible a free working space and the distance between the facade and edge protection can be adjusted during ongoing work. The bracket is installed with through bolt in the roof frame and supports even against the facade or the roof frame.

• Adjustable bracket.
• Configured according to requirement.
• Robust and durable.
• Galvanised components.
• Weight from 5,1 kg.

Art. No. 914125

Product sheet

flex_eave_bracket_w_counterhold

Edge protection at eaves

Edge protection at eaves