Tag: building

Socket base

The Socket base (product code 912110) is used for installing temporary edge protection on top of the concrete slab keeping the edge clear for fixing facade brackets, when unitised curtain-walling is to be installed or when masonry forms the external facade.

The Socket based is fixed to the concrete slab using a double-threaded M16 (product code 919111) that is screwed into an M16 drop-in or impact anchor (product code 919110). It is designed to hold standard system posts (product code 912110) which are held captive in the socket base using a twist-lock design, which prevents accidental uplift or removal.

When the safety barrier is in its lowest position it seals against the slab, and it can easily be raised on the post for various kinds of work at the slab edge. The Socket base can also be installed on stairs along with posts and rails.

• Integrated post lock.
• Several bolt alternatives.
• Hot dip galvanized.
• Weight 1,0 kg.
• 150 pieces delivered in stacking box stillage.

Art. No. 912110

Product sheet

Edge protection on concrete stairs on construction site UK

Edge protection on concrete stairs on construction site UK

Edge protection stairs

Videos

PERSONAL FALL PROTECTION EQUIPMENT

FALL PROTECTION TRAINING - SAFETYRESPECT ACADEMY

SCISSORSAFE FALL PROTECTION SYSTEM

SAFETY CHECK OF EDGE PROTECTION THAT IS INSTALLED AT CONSTRUCTION SITE

EDGE PROTECTION INSTALLATION

EDGE PROTECTION FOR STAIRCASES

CREATING SAFE SHAFT OPENINGS

CREATING SAFE SLAB EDGES

ADJUSTING THE HEIGHT OF BARRIERS

CREATING SAFE OPENINGS

WORKING PLATFORM INSTALLATION WITH ROPE ACCESS

WORKING PLATFORM INSTALLATION FROM SKYLIFT

EDGE PROTECTION AT CONSTRUCTION PROJECT IN SWEDEN

DISMANTLING OF EDGE PROTECTION ON HOUSE ROOF

Socket with rebar 400 mm

Socket w rebar 400 mm

Socket with rebar 400 mm

The Socket with rebar 400 mm (product code 911114) is inserted and tied to reinforcement bars for wall’s or slab’s so that temporary edge protection posts can be inserted into them. This means that the temporary edge protection system can be installed into them before they are lifted into place.

This component is designed to eliminate concrete drilling and the need to work at height by installing the temporary edge protection on the ground in turn reducing installation time. The Socket with rebar is manufactured with a post lock inside the sleeve which retains the edge protection post preventing accidental uplift or removal. It is also pre-fitted with a protective cap to prevent concrete ingress.

Overall length of the vertical bars used to tie the socket into rebar is 400 mm. Socket with rebar 400 mm is also suitable for insitu wall formwork and floor slabs.

• For building structures cast in place.
• Integrated post lock.
• Length of reinforcement 400 mm.
• Delivered with plastic lid.

Art. No. 911114

Product sheet

casting_in_site_safetyrespect_04

Precast socket wall

Precast socket wall

Precast socket wall

The precast socket wall (product code 911200) is inserted and tied to the reinforcement bars of a wall pour so that temporary edge protection posts can be inserted into them. When working with precast concrete wall panels this means that the temporary edge protection system can be installed unto the top of the wall sections before they are lifted into place.

The Precast socket wall is manufactured with a post lock inside the sleeve which retains the edge protection post preventing accidental uplift or removal. It is also pre-fitted with a protective cap to prevent concrete ingress.

This component is designed to eliminate concrete drilling and the need to work at height by installing the temporary edge protection on the ground in turn reducing installation time. Precast Socket wall is also suitable for insitu wall formwork and floor slabs. Overall length is 450 mm with four horizontal bars for tying into rebar.

• Length 450 mm.
• Integrated post lock.
• Delivered with plastic cover.
• Weight 1,8 kg.

Art. No. 911200

Product sheet

Precast attachments – overview

Edge protection precast walls

precast_socket_wall_safetyrespect_6930

Precast edge holder 120 mm

Precast edge holder is installed on the inside of the form work on prefabricated flat floor structures, to use as an attachment for edge protection. It is installed on a vertical surface which gives a free working space.

• Quick installation with keyhole.
• Integrated post lock.
• Hot dip galvanized.
• Weight 1,5 kg.
• 200 pieces delivered in stillage.

Art. No. 911112

Product sheet

Precast attachments – overview

Edge protection on slab edge formwork

Edge protection on slab edge formwork

Precast bracket

Precast bracket is used for mounting edge protection on slab edge formwork. In constructions with prefabricated slab decks the Precast bracket can be installed onto the frameworks edge with the pre-planned Precast edge holder. A dialogue takes place between the manufacturer of the prefabricated material and SafetyRespect’s technical division as to the edge protection solution and positioning of precast edge holders etc.

• Quick installation with keyhole.
• Hot dip galvanized.
• Weight 1,5 kg.
• 200 pieces delivered in stillage.

Art. No. 912119

Product sheet

Edge protection on slab edge formwork

Edge protection on slab edge formwork

Timber beam bracket (primary and secondary)

The Timber beam bracket is used to connect the SR temporary edge protection system to timber beams (GT24, H20 type), for example on primary and secondary beams in horizontal formwork / falsework systems.

They straddle the beams with a bolt lock underneath to clamp onto its top section. The Post 1,3 m is inserted into the Timber beam bracket. Built with a post lock inside the post holder to prevent uplift or accidental uplift which makes it suitable for using on table formwork.

Available in two lengths (primary and secondary) to ensure that the edge protection barriers are set at the correct height. Compatible with most systems including Doka and Peri.

• Integrated post lock.
• Hot dip galvanized.
• Quick screw lock.
• Weight 4,0 kg, 2,3 kg.

Timber beam bracket (primary) – Art. No. 912168
Timber beam bracket (secondary) – Art. No. 912169

Product sheet

Barrier bracket wedge coupler

Barrier bracket wedge coupler is used on posts or scaffold pipes (48,3 mm) for attachment of Barriers or Adjustable link bars, as collective edge protection on construction sites.

• Integrated barrier lock.
• Hot dip galvanized.
• Weight 1,1 kg.

Art. No. 919015

Product sheet

barrier_bracket_wedge_coupler_2

barrier_bracket_wedge_coupler_double_safetyrespect_3

barrier_bracket_wedge_coupler_safetyrespect_2

Bracket for roof gutter

This bracket is installed together with a scantling in the roof gutter, to use for edge protection at the construction site. The bracket is installed together with posts and barriers.

• Integrated post lock.
• Hot dip galvanized.
• Weight 6,8 kg.

Art. No. 930102

Product sheet

Wood beam clamp

Wood beam clamp

Wood beam clamp

In building constructions that consists of wooden beams, the Wood beam clamp can be used as attachment for the edge protection. The bracket has integrated post lock and fits beam dimensions of 45 x 120 – 220 mm. It is designed for a flexible installation and can easily be adjusted as needed. When the bracket has been installed on the beams, Post 1,3 m and Barrier 2,6 are mounted.

• Flexible mounting on wooden beams.
• Beam dimensions 45 x 120-200 mm.
• Easy to adjust.
• Integrated post lock.
• Hot dip galvanized.
• Weight 2,9 kg.

Art. no. 912174

Product sheet

Edge protection bridge

Wood beam clamp

Wood beam clamp bridge

Edge protection bridge