It is a requirement of the Work at Height Regulations 2005, that a Rescue Plan has been written and is in place whenever an individual is working at a height which if fallen from, could cause serious injury. This is known as a Working at Height Rescue Plan.

WORKING AT HEIGHT RESCUE PLAN
It is important that the details of a Working at Height Rescue Plan are specific to the environment, structure and equipment to be used so those that need to be rescued can be quickly and safely recovered without putting anybody else at risk.
A Working at Height Rescue Plan should include the following information
Have we planned adequate anchorage points for the rescuer?
Have we trained the rescuers to a high level of competence?
Which equipment is most suitable for this type of rescue?
How will you know if someone needs rescuing?
How quickly and safely can we get a rescuer to them?
How quickly can you get them to a safe place?
Can we assess any medical, or other, needs of the individual during and after the rescue?

CRITERIA FOR AN ASSIGNED RESCUER
A competent person (somebody who has sufficient training, experience, and knowledge of rescue equipment) must supervise and carry out working at height rescues.
They must be informed if the rescue equipment is changed. They should also receive refresher training annually.
The rescuer should have the skills and knowledge to:
Inspect, anchor, assemble, and use fall protection and rescue equipment safely.
Recognise fall hazards.
Implement fall hazard control measures.
Conduct fall protection and rescue procedures.
Inspect equipment and systems before use.

DESCRIPTION OF RESCUE TRAINING COURSE
Training course ref: SRT5
This is a site based practical course for those that have successfully completed foundation course SST1
Duration: Eight hours
Maximum attendees: 6 persons
A person may fall while connected to a Work Restraint or Fall Arrest system and become suspended in their harness; if a person is suspended even for a short period of time this can result in a life-threatening condition known as suspension trauma.
Full Day Rescue Kit Training Course focussing on method and equipment utilised in the occurrence of a fall incident.

MINIMUM REQUIREMENT – DELEGATES
Attendee’s must have reached a good basic level of competency for working at height from the foundation courses.
Each of the delegates nominated for rescue training will be required to retrieve a weighted dummy back onto the floor he is operating on.
The delegates will have to have shown competence in the Work Restraint session and have permission to work on an unprotected edge of slab using the Work Restraint.

PRE-TRAINING PREPARATIONS
The Scissorsafe trainer will bring a Rescue kit and man-sized dummy ( weight 150kg).
Temporary parking arrangement and assistance required to unload / reload the Trainer’s vehicle and carry the equipment to the demonstration area.

TRAINING AREA
A safe area of concrete deck with Anchor points, Temporary edge protection in place and a nominated supervisor to manage the area.
The Trainer can conduct theory and practical elements of this course in this area which must be of sufficient area to maintain two metres between delegates, supervisor and trainer.
Ideally this area will be on a lower floor of the structure or alternatively over a Canti-deck – this makes the lowering of the dummy faster and speeds up the process of one to one practical training.
Each of the delegates nominated for rescue training will be required to retrieve a weighted dummy back onto the floor he is operating on.
The delegates will have to have shown competence in the Work Restraint session and have permission to work on an unprotected edge of slab using the Work restraint.

SUPERVISION
A nominated supervisor is required to remove a small section of the temporary edge protection (one barrier width – approx 2.4 metres ) to allow a trained person connected to a Work Restraint, system to lower the dummy over the edge of the slab.
The dummy is laid flat near the edge of the slab, then pushed over by foot, there is no chance for the dummy to attach to the person pushing it over.

CERTIFICATION
Upon completion of training, delegates are assessed for for their understanding of the methods and rescue equipment that they have been instructed to use.
We will endeavour to ensure that all every trainee has reached a good level of competence through one to one instruction and repeated practise or explanations of the equipment and procedures.
Training certificates in paper and plastic card format are produced for all successful delegates.

WE ARE HERE TO HELP
Please contact us if you would like to discuss the suitability of this safety component for the application you want to use it for.