The Slab fix for Catch fan is for use on horizontal surfaces at the slab edge.
• 4.7 kg
• EN 1263
• Hot-dip galvanised (HDG)
• 430 x 270 mm
Art. No. 5050003_S
Product sheet
Slab fix
Tag: construction site
Petzl Coeur pulse anchor
Coeur pulse is a removable and reusable stainless-steel anchor for fall protection. It is designed for supporting temporary horizontal lifelines also known as running-lines or as a single user anchor point for the attachment of retractable fall arrestors, or safety lanyards / work restraint or energy-absorbing types.
Made from 3 mm thick steel with a wide rounded connection hole that prevents damage to Karabiner’s and connectors even after repeated clipping. The locking function limits the risk of involuntary removal.
Certification EN795 Class B
Product code SSAN007
Precast concrete walls and beams
Pre-casting concrete elements allows for inclusion of cast-in components to support the temporary edge protection system needed to erect the structure. If edge protection is needed in wall or beam elements, cast-in anchors can be inserted into the formwork. If the attachment point is on the side of the sections, our Vertical bracket (product code 912118) can be installed. If it’s on top of the sections our Post foot (product code 912105) can be used instead as a bracket for posts and steel mesh barriers.
Socket with Rebar 400 mm is an expendable socket that is embedded into slabs or beams with a minimum depth of 500 mm. The Post socket sits flush with the top of the concrete and it is supplied with a protective plastic cap to prevent concrete ingress.
If anchoring is to be avoided, Adjustable clamp 300 or 550 can be installed on site before the units are lifted into position.
SafetyRespect offer technical support and will provide detailed information to your specific criteria.
PRODUCTS
• Vertical bracket
• Post foot
• Socket base
• Socket with rebar 400 mm
• Clamp 300
• Clamp 550
• Post 1,3 m
• Barrier 1,3, 2,6
• Cast protection for Post foot
• Cast protection for Socket base
Exclusion zones with freestanding edge protection
It’s important that exclusion zones can be erected quickly using minimum components with relative portability for carrying through stair cores or on hoists. Freestanding base (product 912320) sits on the concrete floor supporting Post 1,3 m, at 2,4 metre maximum spacings. Using SafetyRespect steel mesh barrier’s as the visible and impassable zone boundary. This offers the benefit of less components, lightweight equipment and fast install, removal and re-installation which can materialise large time savings over long periods of re-cycling between floors.
PRODUCTS
• Freestanding base
• Socket base
• Post 1,3 m
• Barrier 1,3, 2,6
Attachment on the side of concrete slabs
Fixing temporary fall protection to the edge of the concrete slab offers a clear working area on top of the slab for the installation of Systemised Framed Systems (SFS).
The Vertical bracket (product code 912118) is attached to the edge of the concrete using cast-in anchors or post-Drilled reusable screw anchors. It can be installed along two axes offering a clearance from the slab of 20 mm or 59 mm, before Barriers are installed.
PRODUCTS
• Vertical bracket
• Post 1,3 m
• Barrier 1,3, 2,6
• Barrier bracket 360
Exclusion zones with Compression posts
Temporary edge protection systems have to be removed to install unitised facade systems to the external elevations of high-rise buildings. An important control measure on projects where external facade installation is to be undertaken from inside the building is the use of exclusion zones which allow only those permitted to be inside these exposed unprotected areas. It’s important that exclusion zones can be erected quickly using minimum components with relative portability for carrying through stair cores or on hoists. Using SafetyRespect steel mesh barrier’s as the visible and impassable zone boundary we offer two post types for support.
Compression post (product 919030) locks between floor and ceiling slabs removing the need for a separate base plate.
Freestanding base (product 912320) sits on the concrete floor supporting Post 1,3 m, at 2,4 metre maximum spacings.
This offers the benefit of less components, lightweight equipment and fast install, removal and re-installation which can materialise large time savings over long periods of re-cycling between floors.
PRODUCTS
• Compression post
• Freestanding base
• Socket base
• Post 1,3 m
• Barrier 1,3, 2,6
Fall protection net
Fall protection net is used as edge protection at construction sites to catch both people and materials that may fall. The net is available in a variety of sizes and designs and and the attachment is done with a rope or with a so called Grippa in, for example, a roof girder construction. The fall protection net offers both flexibility and safety, which results in increased efficiency when working at great heights. When positioned correctly the protection net is also used to catch falling objects such as waste material, tools, building parts, equipment, etc. The protection net also reduces the feeling of great height, which means that possible fear of heights of the workers is reduced. This creates a feeling of safety with increased efficiency as a result.
Fall protection net 10 x 12 – Art. No. 941010
Fall protection net 8 x 12 m – Art. No. 941011
Fall protection net 8 x 10 m – Art. No. 941012
Product sheet Fall protection net
Compression posts on concrete slabs
The Compression post represents the next generation of systemised temporary edge protection. An easy to install full-height post that uses the floor and soffit surfaces as anchor points providing secure resistance for temporary edge protection Barriers and horizontal rails. It is lightweight for carrying between floors and adaptable for external perimeters or internal exclusion zones.
The Compression post is easy to install in room heights of 2,2 – 3,5 metres by extending to the ceiling and then activating the compression function by a foot. Barriers are securely held and locked in place by twin wedge connectors.
PRODUCTS
• Compression post 2,2-3,5 m
• Frame barrier holder
• Barrier 1,3, 2,6
Adjustable link bars
Adjustable link bars are used as collective fall protection for concrete stairs, shafts, openings etc on construction sites. They are a multi-function telescopic component that connects to SR System Posts or Wall brackets, to form horizontal guardrails for flat slabs, door and window openings, or as temporary handrails fixed to concrete stairs.
The connection brackets are built with a swivel function to allow for slab deviations and to allow them to align when used diagonally. A tightening screw locks the rails when adjusted to length.
On door and window openings Wall brackets are installed on each side of the opening as a bracket for attaching the Adjustable link bars. The Adjustable link bars are available in four different sizes from 0,6 metres up to 3,5 metres. This solution makes it easy to remove and put back the edge protection when various types of work is to be carried out, and it also leaves space for different types of lead-throughs.
• Easily adjustable.
• Swivel brackets.
• Hot dip galvanized.
• Delivered in stacking stillage.
• Weight 3,0 kg, 4,3 kg, 6,2 kg, 9,0 kg.
Adjustable link bar 580-78 0mm: Product code 913322
Adjustable link bar 900-1500 mm: Product code 913321
Adjustable link bar 1500-2500 mm: Product code 913320
Adjustable link bar 2400-3500 mm: Product code 913330
Post 1,5 m alu
Post 1,5 m alu is used for installing barriers as collective edge protection on construction sites. Made of aluminum pipe 48,3 x 4,0 mm with integrated post lock.
• Weight 3,2 kg.
• 100 pieces delivered in stacking stillage.
Art.no. 911116
