Tag: protection

Frame barrier 1,3 alu

Frame barrier 1,3 alu

Frame barrier 1,3 alu

The Frame barrier enables operations to be performed that require hands to be outside the edge protection with no risk of falling. It is an easy-to-use barrier designed in powder coated aluminium. Raising individual barriers is possible if required. It has an integrated toe board on which custom profiling can be placed.

• Easy installation without tools.
• Easily raised and lowered on posts.
• Integrated toe board 150 mm.
• Welded frame construction.
• EN13374 – Class A.
• Weight 5,7 kg.
• 27 pieces delivered in stacking stillage.

Art.no. 913151

Product sheet

Frame barrier edge protection

Frame barrier edge protection

Frame barrier edge protection

Frame barrier holder edge protection

Frame barrier edge protection

Wi bracket

Wi bracket

Wi bracket

Sandwich walls often have low bearing capacity in the outer sheet, and sometimes the there is no outer sheet and only the insulation is in place. In order to minimize the work of installing edge protection, WI brackets can be cast into the framework with customized spacing for the insulation layer. The bracket is configured specifically for each individual project to fit the wall structure and casting method. Outside the insulation, the Flex vertical beam is used for a close fit for the edge protection. When the edge protection is disassembled, the distances are also removed and a minimal completion of the insulation remains to maintain the insulating properties of the wall.

• Precast insertion into wall elements.
• Used with Flex vertical beam.
• Custom length depending on insulation thickness.
• Insulation thickness up to 200 mm.
• Galvanized.
• Weight 1,8 kg.

Art.no. 919200

Product sheet

Wi-bracket

Wi-bracket

Edge protection sandwich wall

Edge protection sandwich wall

 

 

Flex vertical beam

Flex vertical beam

Flex vertical beam

Flex vertical beam is a post holder for the WI bracket, and used with edge protection. Sandwich walls often have low bearing capacity in the outer sheet, and sometimes the there is no outer sheet and only the insulation is in place. In order to minimize the work of installing edge protection, WI brackets can be cast into the framework with customized spacing for the insulation layer. The bracket is configured specifically for each individual project to fit the wall structure and casting method. Outside the insulation, the Flex vertical beam is used for a close fit for the edge protection. When the edge protection is disassembled, the distances are also removed and a minimal completion of the insulation remains to maintain the insulating properties of the wall.

• Integrated post lock.
• Hot dip galvanized.
• Weight 2,4 kg.

Art.no. 919205

Product sheet

Wi-bracket

Edge protection sandwich wall

Edge protection sandwich wall

Wi-bracket

Wi-bracket

Flex working platform

When working on facades and roofs Flex working platform can be installed to create a safe working area. The system is both faster to install and more flexible than traditional scaffolds. The system can be adapted to most situations. Installation is mainly done by SafetyRespect in consultation with the customer.

The working platform has a type approval certificate as a scaffold issued by SP (Technical Research Institute of Sweden) in load class 2 and 3 according to AFS 1990:12.

• Flexible installation on wall, floor structure or truss.
• Used with boardwalk steel sheet.
• Configured according to requirement.
• Hot galvanized components.
• Load classification 2 and 3.
• Console weight from 12 kg.

Art. No. 981122

Product sheet

SafetyRespect Flex working platform

Working platform with fall protection

SafetyRespect Flex working platform

SafetyRespect Flex working platform

Working platform with fall protection

flex_working_platform_safetyrespect_0647

flex_working_platform_safetyrespect_0673x

 

Strap

Very strong and durable straps for attaching, fastening and strapping edge protection equipment at construction sites.

• Great range of application.
• Three different lengths.

Strap 0,6 m. – Art. no. 919206
Strap 1,5 m. – Art. no. 919215
Strap 5,0 m. – Art. no. 919250

Product sheet

 

platform console 55 mm for creating safe platforms and working decks in lift shafts

Platform console 55 mm

platform console 55 mm for creating safe platforms and working decks in lift shafts

When you want to create a safe platform/working deck in a lift shaft you should use Platform consoles that are fastened to the inside of the shaft wall. When the platform consoles have been installed, grade timber of correct dimensions should be used to create the platform level.

• Bracket that creates flats at openings and shafts.
• Installed with console tenon.
• Maximum load 1,000 kg/console.
• Weight 1,4 kg.

Art. No. 930089

Product sheet

shaft_platform_safetyrespect_5774

Compression post 2,2-3,5 m

The compression post represents the next generation of systemised temporary edge protection according to EN13374. An easy to install full-height post that uses the floor and soffit surfaces as anchor points providing secure resistance with a tension load of (ft) 100-150 kg. It is designed to be mounted with temporary edge protection such as barriers and horizontal rails.

The compression post is easy to install in room heights of 2,2-3,5 metres by extending to the ceiling and then activating the compression function by a foot. Barriers are securely held and locked in place by twin wedge connectors.

• Tool free installation.
• Adjustable length 2,2-3,5 m (7’2”-11’5”).
• Tension load (FT) 100-150 kg.
• Fits with various barrier brackets.
• Hot dip galvanized.
• Weight 10,5 kg.
• EN 13374 A, OSHA 1926.502 (B).
• Delivered 50 pcs in stackable pallet.

Art.no. 913151

Product sheet

compression posts with fall protection barriers between concrete slabs at construction site

compression posts with fall protection barriers between concrete slabs at construction site

Installing compression posts and safety barriers with Scissorsafe personal fall protection system

compression posts with temporary edge protection on concrete slab edge

Scissorsafe work restraint system fall protection

Installing compression posts with temporary edge protection barriers

compression posts with temporary edge protection barriers

compression posts with temporary edge protection barriers

Compression posts fall protection at construction site SafetyRespect UKcompression post with frame barrier holder

 

Clamp 300

The adjustable Clamp 300 (product code 912245) is used in vertical configuration as an attachment for temporary edge protection on concrete slab edges, beams and walls with a thickness of 25 – 300 mm. It is built with an integrated socket for post insertion, with an innovative locking device that prevents accidental release of the post. The compact design of this adjustable clamp makes it particularly useful for installing temporary edge protection on retaining walls.

• Width span 25 – 300 mm.
• Vertical or horizontal installation.
• Delivered with movable post holder.
• Several installation alternatives.
• Hot dip galvanized.
• Weight 5,4 kg.
• 50 pieces delivered in stacking stillage.

Art. No. 912245

Product sheet

clamp 300 with temporary edge protection on concrete wall

Edge protection balcony

 

Flex facade bracket

Flex facade bracket

Flex facade bracket

In order to create a free working space on facades Flex facade brackets can be used as attachments for temporary edge protection. The attachment itself is designed in order to facilitate installation of edge protections. The distance between the facade and edge protection can easily be adjusted during ongoing work. Flex Facade bracket is available in three different lengths to suit most situations and if the attachments are projected early in the process, the assembly goes quickly and smoothly with high safety. For more specific needs, special configurations of Flex working platform can be the solution that provides good protection without being in the way of work near the edge of the work surface.

• Adjustable 50 – 550 mm from the facade.
• Keyhole bracket.
• Installed with c/c up to 2,4 m.
• Hot dip galvanized.
• Weight 6,8 kg.

FLEX FACADE BRACKET 280
Art. no. 914043

FLEX FACADE BRACKET 400
Art. no. 914118

FLEX FACADE BRACKET 600
Art. no. 914119

Product sheet

 

Flex facade bracket - Edge protection on house roofs

Fall protection on house facade

Temporary edge protection on facade

flex_facade_bracket_safetyrespect_9736