Post 1,5 m alu is used for installing barriers as collective edge protection on construction sites. Made of aluminum pipe 48,3 x 4,0 mm with integrated post lock.
• Weight 3,2 kg.
• 100 pieces delivered in stacking stillage.
Art.no. 911116
Barrier bracket 360 is an accessory from the Standard system of temporary edge protection components. This bracket is used on posts in corners to allow two barriers to connect to a single post at 90 degrees, so reducing the need for two posts around every corner. This is consequently reducing the equipment schedule and installation time. It simply inserts onto the wedge housings on Post 1,3.
• Dimensions approx. 113 x 85 mm.
• Hot dip galvanized.
Art. No. 919010
The Barrier 2,6 is a steel framed mesh barrier designed according to EN13374. It is used to prevent falls from height when installed and connected on compatible posts, to form a temporary edge protection system for collective safety on construction projects.
This barrier is the fundamental component in our innovative temporary edge protection systems. Manufactured from steel mesh reinforced with a full perimeter frame improving strength and handling with a 260 mm high toe board to prevent debris falls. Overall height is 1220 mm available in lengths 2600 mm and 1300 mm.
Engineered to connect to our posts with twin wedge connectors that allow front-fitting, a precise and safer installation method than “over the post” systems. The barrier replaces twin guardrails, loose toe boards and connectors in one component.
SafetyRespect temporary edge protection systems have connecting components for most structure types, reinforced and precast concrete, infrastructure, steel, timber & prefabricated mainly incorporating the steel mesh barrier to provide collective protection.
The barriers are zinc plated under powder coating for long-lasting durability.
• Available in two lengths, 1.3 and 2.6 meters.
• Zinced and powder coated.
• Stable frame construction.
• Integrated toe board 260 mm.
• Weight 19,7 kg.
• 35 pieces delivered in stacking stillage.
Art. No. 913111
The Barrier 1,3 is a steel framed mesh barrier designed according to EN13374. It is used to prevent falls from height when installed and connected on compatible posts, to form a temporary edge protection system for collective safety on construction projects.
This barrier is the fundamental component in our innovative temporary edge protection systems. Manufactured from steel mesh reinforced with a full perimeter frame improving strength and handling with a 260 mm high toe board to prevent debris falls. Overall height is 1220 mm available in lengths 2600 mm and 1300 mm.
Engineered to connect to our posts with twin wedge connectors that allow front-fitting, a precise and safer installation method than “over the post” systems. The barrier replaces twin guardrails, loose toe boards and connectors in one component.
SafetyRespect temporary edge protection systems have connecting components for most structure types, reinforced and precast concrete, infrastructure, steel, timber & prefabricated mainly incorporating the steel mesh barrier to provide collective protection.
The barriers are zinc plated under powder coating for long-lasting durability.
• Available in two lengths, 1.3 and 2.6 meters.
• Can be easily raised and lowered on the posts.
• Zinc plated and powder coated.
• Stable frame construction.
• Integrated toe board 260 mm.
• Weight 10,8 kg.
• 46 pieces delivered in stacking stillage.
Art. No. 913121
Precast sockets are used to provide a cast-in base fixing for temporary edge protection posts. The Omnia slab is a reinforced precast concrete slab which incorporates a lattice girder to provide stiffness and facilitate the placement of the top mesh. The lattice girder provides rigidity to the slab when in-situ concrete is poured onto it.
Casting the base fixing into the lower slab portion means that temporary edge protection can be installed onto the slab before it is lifted into position, which allows rebar installation and concrete placing onto the slabs within a collectively protected work area.
Precast sockets are fixed to rebar before the lower portion concrete is cast. A cut length of Protective sleeve (product code 911107) is inserted onto the Precast socket, which forms a 50 mm diameter hole around the Post and allows extraction when temporary edge protection is no longer required.
The products are tested in accordance with EN13374 and meet the dimensioning requirements according to the Euro Code.
Precast socket – Art. No. 911108
Protective sleeve for socket – Art. No. 911107
Precast attachments – overview
The Alu beam bracket is used to connect the SR Temporary edge protection system to aluminium primary or secondary beams in horizontal formwork / falsework systems. They straddle the beams with a bolt lock underneath to clamp onto its upper flange. Post 1,3 m is then inserted into the Alu beam bracket, which has built in a post lock inside the post holder to prevent uplift or accidental uplift. This makes it suitable for using on table formwork.
It is available in two lengths (primary and secondary) to ensure that the edge protection barriers are set at the correct height. Compatible with most systems including Ishebeck, Brandway, RMD Kwikform and Peri.
• Integrated post lock.
• Hot dip galvanized.
• Quick screw lock.
• Delivered in stacking stillage.
• Weight 3,0 kg, 2,3 kg.
Alu beam bracket primary: Art. No. 912170
Alu beam bracket secondary: Art. No. 912171
The adjustable Clamp 550 (product code 912220) is used in vertical and horizontal configuration as an attachment for temporary edge protection on concrete slab edges, beams and walls with a thickness of 25 – 550 mm. Built with integrated sockets for post insertion with innovative locking device that prevents accidental release of posts. The clamp is swivelling and can be installed in an angle, like in stairs for example, utilised for attaching temporary guardrails.
• Width span 25 – 550 mm.
• Several installation alternatives.
• Swivelling 360 deg. and reversible.
• Handles all stair angles.
• Hot dip galvanized.
• Weight 7,8 kg.
• 30 pieces delivered in stacking box stillage.
Art. No. 912220
Frame barrier holder 360 is used in corners with Frame barriers to eliminate double attachments or double posts. The holder is easy to install and makes it possible to rise individual barriers when required for certain work situations.
• Hot dip galvanized.
• Weight 1,6 kg.
Art. no. 919025
The Frame barrier holder is a one piece steel component used for attaching mesh barriers, frame barriers or telescopic guardrails onto compression posts, aluminium posts or tubular posts. This is a safe and easy to use solution for safety railing on construction sites.
It has a wedge fitting which makes it easy to install using a hammer. Twin wedge connectors are correctly spaced to accept barriers and telescopic guardrail’s. They makes it possible to rise individual barriers also, when required for certain work situations.
• Hot dip galvanized.
• Weight 2,1 kg.
Art. no. 919021
The Frame barrier enables operations to be performed that require hands to be outside the safety raling with no risk of falling. It is an easy-to-use barrier designed in powder coated aluminium. Raising individual barriers is possible if required. It has an integrated toe board on which custom profiling can be placed.
• Easy installation without tools.
• Easily raised and lowered on posts.
• Integrated toe board 150 mm.
• Welded frame construction.
• EN13374 – Class A.
• Weight 10,3 kg.
• 27 pieces delivered in stacking stillage.
Art.no. 913141
