Tag: work restraint

scissorsafe two part void former

Scissorsafe Void former

scissorsafe two part void former

The Scissorsafe Void Former is an expendable plastic cast-in component used to form anchorage points in precast or insitu poured concrete. The void former consist of two parts. A 35 mm diameter circular disk is nailed or screwed to horizontal formwork in pre-designed locations. After that a tee shaped mould is pushed firmly onto the disk to form an inverted void in the concrete.

Scissorsafe anchors are inserted and deployed in this void when fall arrest or work restraint anchorage is required. The unique nature of this anchorage system means that the anchor isn’t relying own friction to support the fall arrest system connected to it. Upon completion of the structure, Void formers can be closed off with grout or covered with a Scissorsafe plastic cover cap. These are generally used to disguise void former holes when the anchorage point is to be used for maintenance or repair work.

Scissorsafe work restraint system - Personal fall protection

Scissorsafe fall arrest anchor - Personal fall protection device for construction workers UK

deadweight man anchor for personal fall protection during construction of buildings, houses, bridges etc

Deadweight man anchor

deadweight man anchor for personal fall protection during construction of buildings, houses, bridges etc

Site ready deadweight man anchor is a pre-assembled portable anchorage device for work restraint for locations where anchorage cannot be arranged using drilled or clamped anchor devices.

Deadweight man anchors are generally used on non-penetrative surfaces i.e., industrial roofs, but are also useful for installing temporary edge protection on bridges and infrastructure projects. They are equally effective when used as a single user anchor device or when used at each end of a temporary horizontal lifeline where two simultaneous users can operate in work restraint.

This deadweight man anchor is supplied with a rubber friction mat and lifting sling. It can be delivered pre-assembled, just lift into position and clip-on. Alternatively it can be delivered in component parts for site assembly.

• Tested and CE Approved to EN795:2012 Type E.
• Suitable for 2 users in fall restraint or 1 in fall arrest.
• Usable on areas of a maximum 5° pitch.

deadweight man anchor for personal fall protection during construction of buildings, houses, bridges etc

Post drilled reusable anchor connector - Persoal fall protection UK

Reusable anchor connector

Post drilled reusable anchor connector - Persoal fall protection UK

Post drilled reusable anchor connector certified according to EN795, used for fall arrest and work restraint systems as personal fall protection. Zinc plated reusable connection hanger to mount with Non-reusable expansion anchor (product code SSAN008). This anchor connector is used with a non-reusable expansion anchor as part of a two-component post-drilled anchor. It is designed for solid concrete slabs to provide an anchorage point for single-user lanyards or fall arrestors, or in pairs to form anchorage at the end of running-lines (temporary horizontal lifeline) when used for work restraint.

This anchor device is designed to be used on horizontal, vertical and sloping surfaces and is suitable as a replacement for a Scissorsafe anchorage device when a cast-in void former has been omitted or cast unsuccessfully. This anchor is designed for personal fall protection and should only be used with or as part of a work restraint or fall arrest system. We strongly recommend that you load-test any friction anchor before attaching a personal safety system to it. For more advice please refer to product code SCSHYD for load-testing advice.

Product code SSAN009

Expansion thread anchor for fall arrest and work restraint systems

Non-reusable expansion anchor

Expansion thread anchor for fall arrest and work restraint systems

Post drilled expansion thread anchor for fall arrest and work restraint systems. This is a non-reusable expansion anchor thread which is used to fix the post drilled reusable connector (product code SSAN009). The connector provide an anchorage point for single-user lanyards or fall arrestors, or in pairs to form end anchor points at the end of running-lines (temporary horizontal lifelines) when used for in a temporary work restraint system. This fixing is inserted into a 12 mm diameter drilled hole in a concrete slab and when secured holds the post-drilled reusable connector.

Product code SSAN008

Petzl Coeur pulse anchor 2

Petzl Coeur pulse anchor

Petzl Coeur pulse anchor 2

Coeur pulse is a removable and reusable stainless-steel anchor for fall protection. It is designed for supporting temporary horizontal lifelines also known as running-lines or as a single user anchor point for the attachment of retractable fall arrestors, or safety lanyards / work restraint or energy-absorbing types.

Made from 3 mm thick steel with a wide rounded connection hole that prevents damage to Karabiner’s and connectors even after repeated clipping. The locking function limits the risk of involuntary removal.

Certification EN795 Class B
Product code SSAN007

Petzl Coeur pulse anchor 2